Spares for pre-ß Lancias

Lancia Stratos 1973-1975

Campagnolo 5-spoke wheels

Exhausts

In 1998 / 1999 the Campagnolo wheel factory was closed. The moulds were reported to be in very poor condition prior to the closure, and it is unlikely that they will be repaired.

The choice of tyres in a 15" size was also very limited, so we are in the process of getting replica style wheels made in a 16" rim size, as the tyre choice is much better.

As you can see we have taken moulds from a set of 15" wheels, and these are with the wheel factory now. 

It has been some time since this project was started, and for various reasons, it has not progressed as quickly as we would like. We are now pressing to get the project ressurected quickly.

We manufacture high quality front and rear exhaust manifolds for the Stratos.  

We can also supply the rest of the exhaust system for this car.

Badges and decals

Lamp units

We have remade the Lancia Stratos nose badge, and can supply these from stock.

We also have the LANCIA HF and STRATO'S decals which are attached to the rear of the car.

Bertone 'b' logo and STRATOS decals on the doors are also available in both black and white versions

Lancia wheel centre caps are also kept in stock

Reproduction chassis plates are also available from us. We can stamp these with your chassis number if necessary.

We can also supply the Campagnolo wheel stickers in a sheet of 4.

These teardrop shaped lamp were used on many Italian marques including Maserati and Ferrari. We have had a batch of these lamps remade, and can also supply the base gasket as well.

Rear fog lamp and rear reversing lamps for Lancia Stratos

We can also supply the rear lamp units used on the Stratos as well as some of the minor lamps as well.

Clutch / Transmission

Cooling

Gearbox bearings etc.,

Flywheel ring gears

Standard road clutches

Sintered or Paddle multi-plate competition clutches

Straight Gear Sets, Close ratio gear sets can be sourced from Italy

Water hoses & tubes - We've made all the rubber water hoses for the Stratos and also the metal water tubes that often corrode from the inside out. Check your car!

suspension and steering

We can supply the following

Front and rear Bilstein shock absorbers
Standard and Uprated coil springs

The Bilstein dampers together with the uprated springs, results in the excellent "Montecarlo" setup

All suspension bushes

front upper arm balljoint conversion
front lower ball joints
front anti-roll bar conversion

rear lower A arm rosejoint conversion
rear lower tie rod front rosejoint conversion
rear anti-roll bar link rosejoint conversion

Rear suspension pivot pins

Steering track rod ends

Gp. IV design rear suspension uprights

A limited edition watch. Only 100 were made.

Quartz analogue movement, with leather strap.  Stratos pictured on face with the Stratos logo, which is also embossed into the strap.

Comes with presentation tin with Stratos logo on lid.

general books and gifts

• Stratos Superprofile book (out of print)
• Stratos Portfolio (Brooklands)

• Stratos paperweight

This Stratos cutaway, is an A4 sized accurate cutaway of a Gp. IV Lancia Stratos printed on high quality art paper.

We can supply the following publications for the Lancia Stratos

• drivers handbooks - ENGLISH or ITALIAN
• technical data book
• Tavola book - (exploding diagrams)
• 246 Engine overhaul manual
• Stratos build list
• Special tools catalogue

• Rally Specifications List - setup sheets etc from the 1977-78 season detailing gear ratios, suspension settings etc., ITALIAN

Carpets & Trim

We are able to source carpet sets in the original colours. Set of grey in stock

We have at least one pair of original Stratos seats available

We can also supply Alcantara suede type material for retrimming the dashboard.

We are able to supply laminated, reproduction windscreens, made for us on our exclusive tooling in the UK.

These screens are intended for use in the original road cars, but have been supplied to replica owners as well.

We also supply the windscreen for the Kamala kit car

Engine Parts

Oil / Air Separators in various materials

4-valve inlet manifolds

Spark Plug protectors

We also have stocks of most engine parts - valves in both standard and larger sizes, main and big end bearings and gaskets.

Stainless Steel brake hoses, front and rear

Brake pads, front and rear in road compounds and also available in competition grade materials.

Master Cylinders

Brake caliper overhaul kits

Wheel Nuts

We have remade the wheel nuts with the correct domed head.

We can supply both designs - the nut with the straight tapered for the standard road wheels or the curved seat for those with the Campagnolo 5 spoke wheels as used on the Gp. IV cars.

Stocks of both front wheel bearings, the hub seal and hub nut, and also the rare rear wheel bearings.

We have also made the rear wheel bearing retaining nut and can also supply a special tool to suit.